Advantages


banner_sanayiciler_izgaz
WHY

1. NATURAL GAS IS ECONOMIC           

Using the clues to reduce natural gas consumption in process heating systems and buying a new appliance for energy saving can be a solution but by using your existing appliance more effectively you can also save energy.  

  1. Consumption can be decreased 2-5% by taking precautions on the equipments:

    Be careful that the walls and doors of your furnace should be isolated well to minimise the heat loss and to keep the furnace’s exterior surface temperature low. Decrease the water-cooled parts inside the furnace or remove them, if you can not remove them isolate them well to ensure that they do not transmit the heat outside. Minimise the level that can execute the process safely by checking the combustion air in furnace and other gas burning appliances. Ensure that the number of the doors of furnace and other burning appliances and gap on the wall of the appliance is minimum to minimise the heat loss and to prevent the air ingress inside. Minimise the heated air leak from inside to outside and cold air ingress from outside to inside by using pressure units. To minimise the excess air amount of the system and to not to leave unburned hydrocarbon in exhaust gas (carbon monoxide, hydrogen, methane and carbon black) control the air fuel mixture rates with automatic systems.

  2. Consumption can be decreased 2-5% with maintenance:

    Clean the top of heat transfer units like serpentine, radiant pipes and electricity heating systems to increase heat transfer efficiency.

  3. Consumption can be decreased 10-25% by taking decisions about your business

By recovering the heat in exhaust and stack gas you can heat air, water and oil or you can use it for preheating of burden materials which are put in the furnace. You can consider appyling preheating to combustion air by putting a recuperator or recycling exchanger to recover the heat in exhaust gas. You can try to use the heating equipments near full capacity or design capacity for an effective usage. To do this minimise the time intervals between production cycle time and minimise the weight of holding appliance, trays and baskets.

2. NATURAL GAS IS EFFICIENT

Natural gas is gaseous and its purity is high therefore it burns more efficiently compared to liquid fuels. Besides it is the most suitable fuel for optimisation of burning systems. You use natural gas 9155kCal/Sm3 as calorific value.

3. NATURAL GAS IS PRACTICAL

Natural gas is delivered to our customers’ facilities directly through pipes, safe and efficient. It does not require storage area in facilities, it protects you from risk of supply delay. It is an irreplaceable fuel for industry where on time production is aimed.

4. NATURAL GAS IS CONTINUOUS

Pipe system is not affected from weather conditions therefore delay of supply due to the weather conditions are not expected. On the other side, petroleum-derived fuel is transported to customer facility with several means and there is a risk that logistic services can be affected from weather conditions.

5. YOU PAY AFTER USING NATURAL GAS

Cost of natural gas is invoiced after 1 month consumption. IZGAZ clients can save 1 month with this way. For petroleum-derived fuels you need to pay before using.